|
The GP and newer M series bombs of 100-lb weight have the same dimensions. The GP is distinguishable from the M-series by the fact that it has a base plug in the tail and a single suspension lug in addition to two Army lugs. GP bombs are a relatively thin-cased bomb with an ogival nose, parallel sidewalls, and a tapered aft section. It uses both the box type and conical type fin assembly. The box-type fin assembly is secured to the aft end of the bomb with a fin locknut, while the conical-type fin assembly is secured to the bomb body by means of a support tube. The two Army lugs are 14 inches apart, each 7 inches from the center of gravity. The single suspension lug is on the center of gravity 14 inches behind the nose. The weight of the case is 42.1 pounds and the fins weigh between 5.6 to 17.5 pounds. The filler is 50/50 amatol, TNT, or Tritonal. Percentage of filler is approximately 49 percent. The AN-M30 Bomb is fuzed in the nose with the AN-M103 Fuze and in the tail with the AN-M100A2 Fuze. Alternate fuzes that may be used as substitutes or for special purposes are the M103, M118, or M119 Nose Fuzes, and the M112, M100, M106, or its modifications, or the AN-M100A1 Tail Fuzes.
|
|
